SAM131151 - Statements: statement issue: view and print SEES SA statement (Action Guide)

When viewing and printing a SEES SA Statement, follow steps 1 - 12 below. The Guide is presented as follows

Actions to issue a copy statement to the taxpayer	Steps 1 - 6
Actions to issue a copy statement to an agent	Steps 7 - 12

Actions to issue a copy statement to the taxpayer

1.	Go to the SA menu screen
	Enter the UTR of required case
	Select function CASE SUMMARY
	Select function DESIGNATORY
2.	Then open the SEES SA Statement as follows
	Open Excel
	Select SEES from top tool bar
	Select Letters and Forms from drop down menu
	Select SA Statement from list of forms on left hand side
3.	In SEES SA Statement
	Select the [Customer] button
	Select ‘SA’ from the top tool bar
	A screen message will be displayed asking ‘Do you want to import Taxpayer or Agent details?’
	Select the [Customer] button
	Select the [OK] button
	The taxpayer’s details will now be automatically imported from the SA record into the SEES SA Statement input screen
4.	At this stage you have the opportunity to add one or two short free text messages that will be presented on the finished document ‘Notes to taxpayer 1’ - will appear above the statement table on the finished document ‘Notes to taxpayer 2’ - will appear below the statement table on the finished document
5.	Return to the SA record and the CASE SUMMARY screen
	If the statement you are viewing has more than one page (the [FWD] button will be highlighted) you must view the last page
	Select the function STATEMENTS
	On the VIEW STATEMENT screen, select the number of the statement you want to copy. (If the statement has more than 1 page you will need to select [FWD] until you reach the last page)
	Select the [OK] button
6.	Return to the SEES SA Statement screen
	Select ‘Preview’ from top tool bar
	Within a few seconds the statement table and any messages will be imported into the SEES SA Statement and you can view the copy statement prior to printing. You should check that the details on the copy statement are correct before you print and issue

Top of page

Actions to issue a copy statement to an agent

7.	Go to the SA menu screen
	Enter the UTR of required case
	Select function CASE SUMMARY
	Select function DESIGNATORY
	Select ‘Agent’ from the Individuals Designatory Details screen
8.	Then open the SEES SA Statement as follows
	Open Excel
	Select SEES from the top tool bar
	Select Forms and Letters from the drop down menu
	Select SA Statement from list of forms on left hand side
9.	In SEES SA Statement
	Select the [Agent] button
	Select ‘SA’ from the top tool bar
	A screen message will be displayed asking ‘Do you want to import Taxpayer or Agent details?’
	Select the [Agent] button
	Select the [OK] button
	The agent’s details will now be automatically imported from the SA record into the SEES SA Statement input screen
10.	At this stage you have the opportunity to add one or two short free text messages that will be presented on the finished document ‘Notes to taxpayer 1’ - will appear above the statement table on the finished document ‘Notes to taxpayer 2’ - will appear below the statement table on the finished document
11.	Return to the SA record and the CASE SUMMARY screen
	If the statement you are viewing has more than one page (the [FWD] button will be highlighted) you must view the last page
	Select the function STATEMENTS
	On the VIEW STATEMENT screen, select the number of the statement you want to copy. (If the statement has more than 1 page you will need to select [FWD] until you reach the last page
	Select the [OK] button
12.	Return to the SEES SA Statement screen
	Select ‘Review’ from the top tool bar
	Within a few seconds the statement table and any messages will be imported into the SEES SA Statement and you can view the copy statement prior to printing. You should check that the details on the copy statement are correct before you print and issue

Home | Main Contents | Manual Contents

Previous Page | Top | Menu