PAYE20166 - employer records: set up employer record: XP scheme – contractor only (no employees) (Action Guide)

When you become aware that the need arises to set up an employer record for an XP (contractor only) scheme type, follow steps 1 - 12 below.

Notes:

1. Any contractor or agent who telephone the Processing Office should be asked to contact the New Employer Helpline at NESI by either

Or

2. Any written notification received, either by post or by fax, must be dealt with at the Processing Office

Setting up new employer records is a priority. Action should be taken within 2 days of notification that a new record is required.

The guide is presented as follows

Initial action	Steps 1 - 2
Set up employer record	Steps 3 - 4
Long name	Steps 5 - 7
Clerical action	Steps 8 - 10
Employer starter pack	Step 11
Review of Work List	Step 12

For details of how to access any of the Employer Business Service functions use the [Index of Functions] button on the left of the screen.

Initial action

1. Collect and review all the information provided. PAYE20040 provides full details of the information needed
   
   
2. Satisfy yourself this type of scheme is required. More detailed advice is available at PAYE20020

Set up employer record

3. Use Function EMPLOYER SET UP to create a new employer record

The function has been designed to follow a logical sequence and will not allow you to move on until all the mandatory fields have been completed.

The fields you must complete (as a minimum requirement) are

However, you must record all relevant information held relating to the new employer to ensure that the employer record is as complete as possible. For further guidance see PAYE20040

4. Make a note of the computer generated employer and Accounts Office reference

Note: When a new scheme has been set up on EBS you must ensure that a record has been created on BROCS before you proceed with any other action, such as COYO, dormancy and so on. This will normally be the next working day but may sometimes be longer

Long name

If the contractor name is too long to fit the maximum space available in Function EMPLOYER SET UP an abbreviation must be shown

5. Contact the contractor to agree the abbreviated name to use

Enter the abbreviated name on the screen

6. Select the field (box) Employers Name has been abbreviated in Function EMPLOYER SET UP
   
   
7. Send a memo to Banking Operations to

Clerical action

8. For each new contractor take the following action
   
   

9. If you have received form P510 from the SA section or the CT office, follow instructions on the form P510 then dispose of the paper in an appropriate manner
   
   

10. Otherwise prepare form P510 and send this to the SA section or CT office
    
    

Employer starter pack

If a contractor record has been set up by a method other than by staff at NESI Helpline for new employers

11. The employer unit must
    
    

And then

NESI will issue the new scheme letter to notify the local authority of the new employer and Accounts Office reference

No further action regarding the starter pack is required for this scheme type. To see what literature is issued automatically

• Select the [Index of Forms] button on the left of the screen to access the Forms Index
• In the Forms Index select ‘Starter Packs’

And then

• Scroll to the starter pack for this scheme type

Review of Work List

12. Use Function WORKLISTS to