Correcting Change Of Circumstances Effective Date In Child Signals History (AG)

Then, if the change(s) can be made

Check that you have the following information

• Type of change

• Date the change occurred, for example, child responsibility start date

• If you have been provided with all the information, go to step 3

• If you have not been provided with all the information, go to step 2

• Contacted us, contact the claimant by telephone for the missing information you need. Follow the guidance in Contacting The Claimant

• If you obtain the missing information, go to step 3

• If you are unable to contact the claimant by telephone or you cannot obtain the claimants telephone number, send form TC609 to the claimant for the missing information

• If you obtain the missing information, go to step 3

• If you cannot obtain the missing information after following the normal reminder cycle, go to step 13

• Not contacted us, for example, if you notice that the change of circumstances has an incorrect date in the Include From field whilst working on a claim, do not contact the claimant, go to step 3

• Enter the claimants NINO in the Key Entry Data screen

• Select the ‘All’ checkbox

• Click on the [OK] button. You will be taken to the Application Summary screen

Note: If you are taken to the Select Application screen, this will mean that there is more than one claim for this claimant. For example, cases where a household breakdown has occurred and the claimant has re-applied. If you are taken to the Select Application screen, click on the claim(s) affected by this correction to highlight it and then click on the [OK] button. You will then be taken to the Application Summary screen

• Select version 1 and check the initial version of the claim for the circumstance. To do this, in the Application Summary screen

• Select ‘VH’ on the toolbar menu. You will be taken to the Applicant 1 screen in Function VIEW APPLICATION HISTORY

• Select ‘Ch’ on the toolbar menu

• Select 'History' on the toolbar menu

• Select the appropriate signal from the options available. You will be taken to the History screen

Note: The signals that are relevant to the claim will be enabled. You must select the signal that is relevant to the correction you are making

• Any restriction to the Include From field that has been subsequently applied (This text has been withheld because of exemptions in the Freedom of Information Act 2000) should be removed, go to step 9

• If the change was applied as a change of circumstances (it is not on the initial claim version), go to step 4

• If there has been an increase to the elements of entitlement, go to step 5

• If there has not been an increase to the elements of entitlement, go to step 9 to correct the date in the Include From field and remove any restriction

Note: An increase to a maximum tax credits award entitlement is an increase to the elements of entitlement as a result of a change in circumstances. For example, adding a child, starting child care

Note: Income changes have no bearing on the change resulting in an increase to the maximum tax credits award entitlement and will not produce an increase in elements

For example: A claimant has a baby. This is an increase to the maximum tax credits award entitlement, as the claimant will be entitled to the baby element and child element and is still an increase even if they report an increase in CY income, so that they do not actually get any more money from us

• Have the notified date (the earliest date that the claimant notified us about their new circumstances), go to step 6

• Do not have the notified date, use Function MAINTAIN HOUSEHOLD NOTES to check for the notified date

• If you obtain the notified date, make a note of the date and then go to step 6

• If you do not obtain the notified date, find the version of the claim where the change of circumstances was first applied. To do this

• Use Function VIEW APPLICATION

• Go to the Select Application Version screen

• Click on the initial version of the claim to highlight it

• Click on the [OK] button. You will be taken to the Application Summary screen

• Select ‘VH’ on the toolbar menu. You will be taken to the Applicant 1 screen in Function VIEW APPLICATION HISTORY

• Select ‘Ch’ on the toolbar menu

• Select 'History' on the toolbar menu

• Select the appropriate signal from the options available. You will be taken to the History screen. If the change of circumstances is not there, go to the next version

• Click on the [Versions] button to look through each version of the claim

• When you have found the version of the claim where the change of circumstances was first applied, use the date in the Received Date field of that version as the notified date

• Make a note of the date

Note: The types of changes are indicated in Function VIEW APPLICATION by ‘Ch’ for child changes

Note: If the date of the original notification of the change of circumstances from the claimant is earlier than the change of circumstances first applied on the computer, the earlier date should always be used

Then

• Go to step 6

• More than 3 months prior to the original notification date, go to step 8

• Within 3 months of the original notification date, go to step 7

Note: You will have obtained the original notification date from the claimant, from Function MAINTAIN HOUSEHOLD NOTES or from the date in the Received Date field from when the change was first applied in Function VIEW APPLICATION

• On the latest version of the claim, ensure that the date in the appropriate signal Include From field is the same as the date in the signal Start Date field

• Make a note of the date that the date in the Include From field should be

• Change the date in the appropriate signal Include From field to the same date as the date in the Start Date field. To do this, go to step 9

• If the date the change of circumstances occurred is more than 3 months prior to the original notification date, consider what the effective date of the change should be. To do this

• In Function VIEW APPLICATION, calculate what the signal date in the Include From field should be to a date that is exactly 3 calendar months prior to the date notified and then go to step 9

For example: A letter is received from a claimant with a received from date stamp of 14/05/2004, which is 2 weeks prior to today’s date of 28/05/2004. The computer will set the date in the Include From field to 28/02/2004. You must change the date in the Include From field to 3 calendar months prior to the notification date, which is 14/02/2004

• If the date notified is earlier than today’s date and the change is more than 3 months from today’s date, the date in the Include From field will be incorrectly set by the computer

• Make a note of what the date in the Include From field should be

• Change the date in the signal Include From field to a date that is exactly 3 calendar months prior to the date notified. To do this, go to step 9

• Enter the claimants NINO in the Key Entry Data screen

• Select the ‘All’ checkbox

• Click on the [OK] button. You will be taken to the Applicant 1 Details screen

Note: If you are taken to the Select Application screen, this will mean that there is more than one claim for this claimant. For example, cases where a household breakdown has occurred and the claimant has re-applied. If you are taken to the Select Application screen, click on the claim(s) affected by this correction to highlight it and then click on the [OK] button. You will then be taken to the Applicant 1 Details screen

Then

• Go to step 10

• Go to the Child Details screen

• Click on the appropriate child to highlight it

• Click on the [Correction] button. You will be taken to the Correction Child screen

• If you are changing the date in the Responsibility Include From field only, go to step 11

Otherwise

• Select the appropriate signal history checkbox

• Click on the [History] button. You will be taken to the History screen

• Click on the appropriate entry to highlight it

• Click on the [Change] button. You will be taken to the Change screen

• Change the date in the Start Date field to 1 day earlier than the existing date

Note: If there is a previous period of History and the dates are consecutive with the period you are correcting. To prevent any overlapping of the periods of history, change the date in the Start Date field to a date that is 1 day later than the existing date

Note: If the date in the Start Date field is already correct, to prompt the re calculation of the award you must still change the date to an earlier date and then change it back to the correct date

• When the date in the Start Date field has been corrected, the date in the Include From field may be restricted by the computer to a maximum of 3 months prior to today’s date. If this happens, correct the date in the Include From field

• Enter the correct date in the Include From field (you will already have made a note of the correct date to enter in the Include From field)

• Click on the [OK] button. You will be taken back to the History screen

• Click on the [OK] button. You will be taken back to the Correction Child screen

• Click on the [OK] button. You will be taken back to the Child Details screen

• Go back to the History screen and change the date in the Start Date field back to the correct start date

• Enter the correct date in the Include From field again, if necessary

• Click on the [OK] button. You will be taken back to the History screen

• Click on the [OK] button. You will be taken back to the Correction Child screen

• Click on the [OK] button. You will be taken back to the Child Details screen

• If no further corrections are required, click on the [OK] button. You will be taken to the Amend Finish screen. Go to step 12

• If further corrections are required to any other change of circumstances effective dates, repeat step 10

• If you also need to change the date in the Responsibility Include From field, go to step 11

For example: A child was in childcare on 06-01-2004 and the date in the Include From field is 06-04-2004 and the date in the Start Date field is 06-01-2004. To change the date in the Include From field to 06-01-2004

• Use Function AMEND APPLICATION and go to the In Childcare History screen

• Change the date in the Start Date field to 05-01-2004 and change the date in the Include From filed to 06-01-2004

• Go back to the In Childcare History screen and change the date in the Start Date field back to 06-01-2004

• Enter the correct date in the Include From field, if necessary

• In the Correction Child screen, change the date in the Date of Birth field to 1 day earlier

• Tab to the next field. This will automatically change the date in the Responsibility Start Date field to the same date

• Select the 'Responsibility History' checkbox

• Click on the [History] button. You will be taken to the History screen

• Click on the appropriate entry to highlight it

• Click on the [Change] button. You will be taken to the Change screen

• Change the date in the Include From field to the same date as the date in the Start Date field

• Tab to the next field

• Click on the [OK] button. You will be taken back to the History screen

• Click on the [OK] button. You will be taken back to the Correction Child screen

• Click on the [OK] button. You will be taken back to the Child Details screen

• Click on the same entry to highlight it

• Click on the [Correction] button. You will be taken to the Correction Child screen. Change the date in the Date of Birth field back to the original date

• Tab to the next field. This will automatically change the date in the Responsibility Start Date field to the same date

• Select the 'Responsibility History' checkbox

• Click on the [History] button. You will be taken to the History screen

• Click on the appropriate entry to highlight it

• Click on the [Change] button. You will be taken to the Change screen

• Change the date in the Include From field to the correct date

• Tab to the next field

• Click on the [OK] button. You will be taken back to the History screen

• Click on the [OK] button. You will be taken back to the Correction Child screen

• Click on the [OK] button. You will be taken back to the Child Details screen

• If corrections to other children need to be made, repeat step 11

• If no corrections to other children need to be made, click on the [OK] button. You will be taken to the Amend Finish screen. Go to step 12

For example: Correcting the date in the Responsibility Start Date field

• The date of birth of a child is 02-07-2004 and the date in the Include From field is 02-10-2004 and the date in the Start Date field is 02-07-2004. To change the date in the Include From field to 02-07-2004

• Go to the Correction Child screen

• Change the date in the Date of Birth field to 01-07-2004. The date in the Responsibility Start Date field will automatically change to the same date, 01-07-2004. Change the date in the Include From field to 01-07-2004

• Change the date in the Date of Birth field in the Correction Child screen back to the original date 02-07-2004. Change the date in the Include From field to 02-07-2004

• Enter the date of the correction in the Received Date field. If you do not know what that date is, use today's date
   
• Select ‘Paper’ from the Source drop down menu

Note: If the correction has been notified through a Contact Centre (CC), select 'Telephone' from the Source drop down menu

• Select 'NTC error' or 'Applicant error', as appropriate from the Reason drop down menu

• Click on the [OK] button

Note: The changes you have made in this function will not be applied until you complete the Amend Finish screen and click on the [OK] button

• If the message ‘S18 Refinalisation Rules – Potential inappropriate refinalisation for CCYY–CCYY. If you have the authority to refinalise under S19, S20 or S21 of the Tax Credit Act 2002 or due to an appeal decision. Press OK to process the change or Cancel’ displays

• The changes you are making will re-finalise the claim, follow the guidance in Establish If A Change Can Be Made before making any changes

Then, if you can make the change

• Click on the [OK] button on the message
   
• Go to step 13

• If the message ‘S18 Refinalisation Rules – Actual Income for CCYY-CCYY is required. This change will not be accepted’ displays

• You will not be able to make the change because the PY actual income is required, follow the guidance in Establish If A Change Can Be Made before making any changes

Then, if you can make the change

• Click on the [OK] button on the message
   
• Go to step 13

• If the message ‘S18 Refinalisation Rules – You do not have the authority to refinalise CCYY-CCYY. This change will not be accepted. Please refer to the appropriate team’ displays

• The changes you are making will refinalise the claim
   
• Click on the [Cancel] button. You will be taken to the Amend Application Details screen
   
• Click on the [Cancel] button
   
• When the message ‘All changes to the application will be lost for this session, do you wish to proceed?’ displays, click on the [Yes] button
   
• Pass the case to a Level 2 User or your manager. For more information on Level 1 and Level 2 users, see Level 1 and Level 2 User Roles
   
• Take no further action

• If none of the above messages display, go to step 13

For example

• From step 2, enter ‘TCMZ Cannot apply change claimant failed to provide information’

• From step 10, enter ‘TCMZ Restriction removed for FTE, notified on 30/10/04’

Notes:

You must follow the guidance in How To Correctly Complete Application And Household Notes when you record the note

And also

Follow the guidance in Maintain Household Notes

Then

• Go to step 14

Follow the guidance in Preparing And Sending Documents For Storage